The 3Tech Wall Outlet, a product by Yelco, is a product that was developed to allow operators to have only one connection point inside the customer's home, where they can aggregate all the technologies they work with.
The concept of fiber wall outlets isn’t new. Nevertheless, this type of equipment came with limitations. The existent outlets were designed to only accommodate optical fibers and not any other technologies. Its inability to aggregate different technologies causes a bigger impact inside the customer’s home.
These limitations made it necessary to have multiple equipment for different technologies which created a bigger inconvenience to a client.
The 3Tech Wall Outlet is an innovative product, which does not exist in the market. It has the capacity to aggregate the three technologies into a single point, avoiding the installation of more equipment inside the customer's home.
The technologies it aggregates are those that are used nowadays in FTTH networks: which are coaxial, data and fiber networks.
Having this, the operator can install three different sockets in the costumer’s premises, in the same equipment, where before he’d need three different ones:
Besides the possibility of aggregation of technologies, it also brings a lot of flexibility, because it is possible to make many combinations enter the number of outlets available for each of the technologies.
The 3Tech Wall Outlet has an appealing design, with pleasant curves and a high-quality surface finish. It’s made from ABS polymer and, if required, it can be produced with special plastic components to have LSZH and Fire-Retardant features. The cover can be customized with the network operator’s logo.
Management wise, the 3Tech Wall Outlet has features that ensure that a minimum bend radius of 25mm is maintained as the bare fiber is routed through the outlet. Cables can enter both from the base or from the rear, and screw holes allow for an easy installation and positioning. Alternatively, the recessed base of this equipment can be fastened with adhesive or even hot glue, maintaining the outlet attached to the wall.
To connect the three technologies in this solo equipment while also adapting to different situations, the 3Tech Wall Outlet offers versatility. You can attach multiple combinations such as:
To also answer to the challenge of keeping the dimensions of the solution in a size that wouldn’t create much impact when installed, the 3Tech Wall Outlet was developed to be compact (84x84x15mm).
In this compact size, besides its three technology and multiple configuration abilities, it can support maximum 4x SC simplex or 4x LC duplex optical fusions and accommodate 8 splice sleeves (up to 45mm).
All these features in a single solution, where the end customer can automatically choose the configuration to apply on-site.
This equipment can be supplied with adaptors and pigtails if required, or even as a pre-terminated product.
It’s compatible with other Yelco’s components such as the accessory 3Tech Wall Outlet CATv Box, that allows to incorporate a wall outlet CATV box in the 3Tech Wall Outlet.
Learn more about the 3Tech Customer Wall Outlet.
Want to know how to customize or create a tailor-made product for your network? Know more about Yelco.